Sounds: UPDATE 14.04.2016 EQ = Equalize ( > v1ref008)

without EQ:
InDevice : ALSA:USB PnP Sound Device: USB Audio (hw:0,0)
OutDevice : ALSA:USB PnP Sound Device: USB Audio (hw:0,0)

with EQ:
InDevice : ALSA:default
OutDevice : ALSA:default

Sounds:

send sound file to FRN-Raspberry via (shell/bash/console) with SCP or WinSCP
attention! the directory must be actually exist
master@FRN4PI-host:~$ mkdir -p /home/frn/sound     # (create directory)
master@FRN4PI-host:~$ scp roger.wav frn@[IP of YOUR FRN-Raspberry]:/home/frn/sound

SoundsDir: [ /home/frn/sounds ] // for example, who saved sound-files

SoundRoger: [ roger.wav ] // then use this file, if field empty, then play standard sound

EnableRoger: [ YES/NO ] // then NO -> play nothing | then YES play (SoundRoger: file)

Confirmation tone (RF IN):

SoundCourtesy: [ file.wav ] // same as above

EnableCourtesy: [ YES/NO ] // same as above

[ The wave file should be formatted ]
       - mono
       - 8kHz Sampling
       - PCM or GSM codec (GSM 6.1 WAV49)


Callsign     [ IMMER IN GROSS BUCHSTABEN ]

Audio werden auf der Übersicht im Web-Frontend gezeigt... (Gateway gestoppt)
InDevice      [ ALSA:sysdefault ]
OutDevice   [ ALSA:default ]

1.) RS-232 1=high 0=low
PTT       [ COM:/dev/ttyUSB0:RTS:0 ]
PTT       [ COM:/dev/ttyUSB0:RTS:1 ]
COS      [ COM:/dev/ttyUSB0:CTS:0 ]
COS      [ COM:/dev/ttyUSB0:CTS:1 ]
LIGHT   [ kann frei bleiben bei USB-RS232 ]

2.) GPIO 1=high 0=low
PTT       [ GPIO:17:gpio17:0 ]
PTT       [ GPIO:17:gpio17:1 ]
COS      [ GPIO:22:gpio22:0 ]
COS      [ GPIO:22:gpio22:1 ]
LIGHT   [ kann frei bleiben bei GPIO ]

3.) VOX
settings view over ssh ...

 - Audio Level for LIGHT (no modulation)
/opt/frn4pi.org/frn4pi audiolevel

 - then modulation for COS :: for testing when COS is activated
/opt/frn4pi.org/frn4pi checkinput:VOX:2000

PTT       [ wie bei RS-232/GPIO ]
COS      [ VOX:2000 ]
LIGHT   [ VOX:100 ]